Table of Contents
Advertisement
wLSN
5.13.3
Testing
Test the detector at least once each year. Test the detector
with the 13-332 Sound Sensor Tester.
Figure 5.21 13-332 Sound Sensor Tester
Callout
1
2
3
Entering Test Mode
Place the detector in Test Mode. In Test Mode, the detector's
LED ENABLE switch (Item 8, Figure 5.19, Page 50) is overridden.
You can enter the Test Mode locally or remotely.
To enter the Test Mode locally:
1.
2.
3.
WARNING!
The 13-332 Sound Sensor Tester produces extremely loud
sounds and can be hazardous to hearing when used at close
range. Do not point the 13-332 toward someone's head.
Bosch Security Systems, Inc.
13-332
Description
ACTIVATE/TEST switch
Start button
FLEX/MAN switch
Carefully open the service door of the detector.
Insert a screwdriver into the slot next to the sensitivity
switches (Item 1, Figure 5.20, Page 52).
Touch both test pads at the same time with the tip of the
screwdriver.
The EVENT LED (green) (Item 6, Figure 5.19, Page 50)
flashes once each second. If the green LED does not flash,
repeat Steps 2 and 3.
System Reference Guide
ACTIVATE
TEST
FLEX
1
2
wLSN Devices | en
MAN
3
F01U138553 | 01 | 2010.05
53
Advertisement
Table of Contents
