Table of Contents
Advertisement
wLSN
Callout
1
2
3
Defaulting a Smoke Detector
1.
Figure 4.3 Remove Smoke Detector from Base
2.
3.
Figure 4.4 Separate Housing Cover and Base
4.
5.
Bosch Security Systems, Inc.
Discovering and Defaulting a wLSN Device | en
Description
Wall tamper switch (back of siren)
Cover tamper switch (inside of siren)
RFSS LED (inside of siren)
Rotate the detector counter-clockwise to remove it from
the mounting base.
1
Remove the batteries.
Separate the housing cover and base by inserting a flat
head screwdriver between the cover and base.
Turn the housing base over and locate the transmitter
printed circuit board (PCB).
Remove the jumper from the transmitter PCB and reinsert
it over both pins.
System Reference Guide
2
F01U138553 | 01 | 2010.05
15
Advertisement
Table of Contents
