Table of Contents
Advertisement
wLSN
Figure 5.15 Key Fob Buttons and LEDs
Callout
1
2
3
4
5
6
Key Fob Buttons
Refer to your control panel's documentation to program the
functions of the programmable buttons.
Pressing any button causes the status LED to flash alternately
red and green for about 15 sec. This indicates that commands
were transmitted to the control panel.
Pressing and holding both the arm and disarm buttons together
for 1 sec transmits a panic signal to the control panel.
LED
A flashing red status LED during key fob inactivity is an
indication to replace the batteries.
For specific information regarding the various LED states, refer
to your control panel's documentation.
Bosch Security Systems, Inc.
6
5
Description
Status LED
Disarm button
Arm button
Programmable buttons
Button for High intensity LED
High intensity LED
System Reference Guide
wLSN Devices | en
1
2
3
4
F01U138553 | 01 | 2010.05
43
Advertisement
Table of Contents
