Table of Contents
Advertisement
wLSN
5.7
wLSN Inertia Detector
(ISW-BIN1-S135X)
The wLSN Inertia Detector is a vibration detector combined
with a wireless transceiver used for monitoring doors or
windows.
A cover-and-wall tamper switch transmits a tamper signal when
the cover is removed from its base, or when the unit is pulled
away from the wall.
An LED provides status for Test, RFSS, and Discovery Modes.
Specification
Maximum Distance
between Detector
and Magnet
Power
Table 5.11 wLSN Inertia Detector Specifications
NOTICE!
Sensor element orientation is critical to the proper operation of
the device. The arrow that is embossed on the body of this
sensor must point up. Refer to Figure 5.11, Page 32.
Bosch Security Systems, Inc.
Value
≤ 12,7 mm (1/2 in.)
Place the magnet on either side of the detector.
2 AA batteries, 1.5 V alkaline
System Reference Guide
wLSN Devices | en
F01U138553 | 01 | 2010.05
31
Advertisement
Table of Contents
