Bosch DIVAR IP 6000 (2U) Quick Installation Manual
Hide thumbs
Also See for DIVAR IP 6000 (2U):
- Quick installation manual (28 pages) ,
- Installation manual (20 pages) ,
- Instruction manual (48 pages)
Related Manuals for Bosch DIVAR IP 6000 (2U)
Summary of Contents for Bosch DIVAR IP 6000 (2U)
- Page 1 DIVAR IP 6000 (2U) DIP-6180-00N | DIP-6183-4HD | DIP-6183-8HD | DIP-6184-4HD | DIP-6184-8HD Quick Installation Guide...
-
Page 3: Table Of Contents
Setup instruction Setting the IP address Standard system configuration Additional software and documentation OSS licenses MIT - iniparser MS-PL - MSDN Library NTP License - NTP Project Service and repair Bosch Sicherheitssysteme GmbH Quick Installation Guide 2016.03 | V2 | DOC... -
Page 4: Safety Information
The Low Voltage power supply unit must comply with EN/UL 60950. The power supply must be a SELV-LPS unit or a SELV - Class 2 unit (Safety Extra Low Voltage - Limited Power Source). 2016.03 | V2 | DOC Quick Installation Guide Bosch Sicherheitssysteme GmbH... -
Page 5: Important Safety Instructions
Read, follow, and retain for future reference all of the following safety instructions. Follow all warnings before operating the device. – Clean only with a dry cloth. Do not use liquid cleaners or aerosol cleaners. Bosch Sicherheitssysteme GmbH Quick Installation Guide 2016.03 | V2 | DOC... - Page 6 For protection of the device, the branch circuit protection must be secured with a maximum fuse rating of 16 A. This must be in accordance with NEC800 (CEC Section 60). 2016.03 | V2 | DOC Quick Installation Guide Bosch Sicherheitssysteme GmbH...
-
Page 7: Electrical Safety Precautions
SELV circuits. – If safe operation of the unit cannot be ensured, remove it from service and secure it to prevent unauthorized operation. In such cases, have the unit checked by Bosch Security Systems. –... -
Page 8: Esd Precautions
Notice! This is a class A product. In a domestic environment this product may cause radio interference, in which case the user may be required to take adequate measures. 2016.03 | V2 | DOC Quick Installation Guide Bosch Sicherheitssysteme GmbH... -
Page 9: Fcc And Ices Compliance
Safety information | en Notice! Video loss is inherent to digital video recording; therefore, Bosch Security Systems cannot be held liable for any damage that results from missing video information. To minimize the risk of losing information, we recommend multiple, redundant recording systems, and a procedure to back up all analog and digital information. - Page 10 Operation of this equipment in a residential area is likely to cause harmful interference, in which case you will be required to correct the interference at your own expense. 2016.03 | V2 | DOC Quick Installation Guide Bosch Sicherheitssysteme GmbH...
-
Page 11: About This Manual
This manual is written for professional system integrators and PC technicians. It provides information for the installation and use of the chassis. Installation and maintenance should be performed by experienced and qualified technicians only. Bosch Sicherheitssysteme GmbH Quick Installation Guide 2016.03 | V2 | DOC... -
Page 12: System Overview
Rear view: 2x power supply modules 2x redundant SSD drives for operating system (RAID1 mirror) 1x serial port 1x network port for BMC (Baseboard Management Controller) connection and IPMI (Intelligent Platform Management Interface) monitoring 2016.03 | V2 | DOC Quick Installation Guide Bosch Sicherheitssysteme GmbH... - Page 13 DIVAR IP 6000 (2U) System overview | en 4 USB ports 2x network ports for data transmission (2x USB 2.0 and 2x USB 3.0) (teamed) Note: Do not change the teaming mode! 1x VGA display output Bosch Sicherheitssysteme GmbH Quick Installation Guide 2016.03 | V2 | DOC...
-
Page 14: Rack Installation
If the chassis itself shows damage, file a damage claim with the carrier who delivered it and notify the respective Bosch RMA desk. Due to the weight of the system: After opening the top of the shipping box, one person should stand at either end and lift the disk array out together. -
Page 15: General System Precautions
This rail will fit a rack between 26" and 33.5" deep. 4.3.1 Separating the sections of the rack rails The chassis package includes two rail assemblies in the rack mounting kit. Each assembly consists of two sections: Bosch Sicherheitssysteme GmbH Quick Installation Guide 2016.03 | V2 | DOC... -
Page 16: Installing The Inner Rails On The Chassis
Caution! Do not pick up the chassis with the front handles. They are designed to pull the system from a rack only. 2016.03 | V2 | DOC Quick Installation Guide Bosch Sicherheitssysteme GmbH... -
Page 17: Installing The Outer Rails To The Rack
Secondly, these tabs also lock the system in place when fully extended from the rack. This prevents the system from coming completely out of the rack when you pull it out for servicing. Bosch Sicherheitssysteme GmbH Quick Installation Guide 2016.03 | V2 | DOC... -
Page 18: Installing The Chassis In The Rack
Optional screws may be used to secure the front of the chassis to the rack. 4.3.5 Installing the chassis in a Telco rack Notice! Do not use a two post "Telco" type rack. 2016.03 | V2 | DOC Quick Installation Guide Bosch Sicherheitssysteme GmbH... -
Page 19: Turning On The System
Plug the power cord from the power supply unit into a high-quality power strip that offers protection from electrical noise and power surges. We recommended using an uninterruptible power supply (UPS). Press the power button on the control panel to turn on the system. Bosch Sicherheitssysteme GmbH Quick Installation Guide 2016.03 | V2 | DOC... -
Page 20: System Setup - First Steps
To change the IP address using Microsoft Utility Server Manager program: Open the Microsoft Utility Server Manager and follow the instructions on the screen to configure the network interface cards (NICs). 2016.03 | V2 | DOC Quick Installation Guide Bosch Sicherheitssysteme GmbH... -
Page 21: Standard System Configuration
The system comes with iSCSI Target Service enabled. Notice! On empty systems you must set up the iSCSI target and the iSCSI LUNs of the drives manually after initial RAID configuration. Bosch Sicherheitssysteme GmbH Quick Installation Guide 2016.03 | V2 | DOC... -
Page 22: Additional Software And Documentation
Software for configuration of hardware and software is available on the online product catalogue. Documentation and software for Bosch Security Systems products can be found in the online product catalogue as follows: Open any browser > enter www.boschsecurity.com > select your region and your country >... -
Page 23: Oss Licenses
A “contributor” is any person that distributes its contribution under this license. “Licensed patents” are a contributor’s patent claims that read directly on its contribution. 2. Grant of Rights Bosch Sicherheitssysteme GmbH Quick Installation Guide 2016.03 | V2 | DOC... -
Page 24: Ntp License - Ntp Project
The University of Delaware makes no representations about the suitability this software for any purpose. It is provided "as is" without express or implied warranty. 2016.03 | V2 | DOC Quick Installation Guide Bosch Sicherheitssysteme GmbH... -
Page 25: Service And Repair
The storage equipment is shipped with an original manufacturer Service and Support agreement. Bosch RMA Desk is the Single Point of Contact in case of failure but the Service and Support obligations are fulfilled by the manufacturer or a partner. - Page 28 Bosch Sicherheitssysteme GmbH Robert-Bosch-Ring 5 85630 Grasbrunn Germany www.boschsecurity.com © Bosch Sicherheitssysteme GmbH, 2016...