Table of Contents
Advertisement
wLSN
Cleaning the Detector and Replacing the Optical Chamber
Clean the detector cover with a dry or damp cloth as needed to
keep it free from dust and dirt. Clean the detector interior
annually, or as needed.
To clean the detector:
1.
2.
3.
Figure 5.17 Remove the Detector Cap
4.
Figure 5.18 Remove the Chamber
Bosch Security Systems, Inc.
Rotate the detector counter clockwise to remove it from
the mounting base.
Remove the batteries.
Slide a flat-head screwdriver into the slot on the detector
cap and gently push down to pry the cap off. Refer to
Figure 5.17, Page 47.
Squeeze the optical chamber where indicated and pull it
up and away from the detector. Refer to Figure 5.18.
3
System Reference Guide
wLSN Devices | en
3
2
F01U138553 | 01 | 2010.05
47
1
Advertisement
Table of Contents
