Bosch wLSN System Reference Manual page 25

wLSN
LED Color
Green to red – fast flash
Green – lights for 3 sec
Yellow – lights for 3 sec
Red – lights for 4 sec
Table 5.7 Dual Walk Test LED Indications
2.
3.
Bosch Security Systems, Inc.
Perform the walk test from the opposite direction to
determine the coverage pattern boundaries from both
sides.
When the walk test is complete:
– From the control panel, enter the appropriate
command sequence at the control panel to exit from
the Walk Test mode.
– At the detector, the detector returns to normal
operation after 90 sec of inactivity.
System Reference Guide
Function
Power-up (Walk Test disabled)
Motion detected by PIR
Motion detected by microwave
To adjust the detector's microwave range,
refer to Page 23.
Alarm, motion detected by both
technologies (PIR and microwave)
wLSN Devices | en
F01U138553 | 01 | 2010.05
25