Table of Contents
Advertisement
20
en | wLSN Devices
Rotary Switches
There are three rotary switches on the wLSN Diversity Hub: S1,
S2, and S3. Use S1 to make the following settings:
–
–
S2 and S3 are reserved for future use.
Refer to Figure 5.2 for switch location, and Table 5.3 for switch
settings.
Figure 5.2 wLSN Diversity Hub Rotary Switch
Switch Position
1 (Default)
2
4
5
6
7
9
0, 3, 8
Table 5.3 S1 Settings
NOTICE!
Assign a different address to each data bus device.
F01U138553 | 01 | 2010.05
Set the data bus address for hub-to-control panel
communication during normal operation
Set the antenna strength when the hub is in RFSS Mode
Operation
Data Bus Address 50
Data Bus Address 51
RFSS Mode, Antenna 1, full power
RFSS Mode, Antenna 1, Grade 2 (6 dB attenuation)
RFSS Mode, Antenna 2, full power
RFSS Mode, Antenna 2, Grade 2 (6 dB attenuation)
Default the hub
Reserved for future use
System Reference Guide
S1
S2
Bosch Security Systems, Inc.
wLSN
S3
Advertisement
Table of Contents
