Setting The Power Saving Features; Restoring The Default Settings - Canon CanoScan FS4000US User Manual

Setting the Power Saving Features

The lamp unit is always on when the FS4000US unit is powered. The Power Saving function
temporarily turns off the lamp to conserve energy when a scan is not initiated over a set period of
time. When FilmGet FS is first installed, this option is on and the activation period is set to 30 minutes.
Click the [Settings] menu
and select [Power...].

Restoring the Default Settings

You can restore all the default settings for the film type, color mode, scan settings, image
adjustments and menu items by selecting this item from the [Settings] menu.
Click the [Settings] menu and
select [Reset Defaults...].
"Activate After:" Input Box
Input a value from 10 to 59 to shut off the lamp
when the option is activated. You can also use the
arrow keys to adjust the value.
Power Saving Settings Check Box
Click to add or remove the check mark. The "Use Power Save"
option is activated when the check mark is present.
[No] button
Click here to cancel without resetting the
default settings and close the dialog box.
[Yes] button
Click here to reset the default settings and close the dialog box.
Other Functions
FilmGet FS User's Guide
1
2
3
4
5
93