• Selecting the [Reduced] option sets the image size to fit within the margins below.
Top Margin: 20.5 mm
Bottom Margin: 20.5 mm
Left Margin: 3.7 mm
Right Margin: 3.7 mm
Selecting an Output Target
Select an output target with this item.
• The output resolution of the [Text] option is set to the following values.
Windows: 96 dpi
Macintosh: 72 dpi
Image and File Sizes
The image and file sizes are automatically calculated when you set the paper size, the display size
and the output target. (The input boxes are grayed out and values cannot be entered directly into the
boxes.)
The image size units can, however, be switched between pixels, inches, centimeters and millimeters.
The image size numbers will change to the appropriate values for the type of units selected. Monitor
how these settings change as you change the settings above them.
Select this when you are pasting the image into a document.
Select one of these when you are printing to a printer. Selecting
[Connected printer] automatically sets the resolution to that of
the printer you are currently using.
Select this when you are sending the image as a fax.
See p. 69, "Adding and Deleting Menu Items."
Image Size
File Size
Adjusting the Scan Settings
FilmGet FS User's Guide
1
2
3
4
5
61