Using Custom Mode
The custom mode allows you to add six preset items. To use these settings, click the [Custom Mode]
button and select the setting you want from the pull-down menu. This feature lets you scan
immediately without having to set complex scan settings.
In addition, you can add new scan settings and access them from this mode. (See p. 68, "Adding
Scan Settings," for more information.)
(2) Select a scan setting.
Highlight and click to select a setting.
A check mark will appear beside the
selected item.
Preset Scan Settings
Hi-Res (File Mode)
Select this when a high quality image is required. Note, however,
that the file will be quadruple the size of a Medium-Res file. The
input and output resolutions are set to [4000 dpi].
Medium-Res (File Mode)
Select this when you require the image quality to be somewhere
between the Hi-Res and Low-Res quality. The file is quadruple
the size of a Low-Res file. The input and output resolutions are
set to [2000 dpi].
Low-Res (File Mode)
Select this when the image quality is not critical. The file size is
smaller than either the Hi- or Medium-Res files. The input and
output resolutions are set to [1000 dpi].
View on Monitor (Display Mode)
Select this when you intend to view the scanned image on a
monitor. The monitor setting is set to [My Monitor] and the
display size is set to [60%].
(1) Click the [Custom Mode] button.
FilmGet FS User's Guide
Adjusting the Scan Settings
65
1
2
3
4
5