Use Color Matching - Canon CanoScan FS4000US User Manual

Use Color Matching

(Windows: ColorGear, Macintosh: ColorSync)
This mode automatically corrects characteristic differences in color output between scanners and
monitors. With this option on, matching the original image colors to the colors on the monitor output is
much easier. (When FilmGet FS is first installed, this option is off by default.)
However, when this option is on, the color is automatically adjusted during preview and final
scanning, so histogram and other image adjustments are not available (See p. 71). To scan with
image adjustments, first set the "Use Color Matching" option to off. This option is only effective when
the color mode is set to [24-Bit Color] or [42-Bit Color].
Click the [Settings] menu and
select [Color Matching].
The color matching on/off setting will be displayed in the image adjustment section.
Color Matching ON/OFF
Setting
• The color matching system for this scanner is ColorGear for the Windows version and ColorSync for the
Macintosh version.
• When the "Use Color Matching" option is on, the monitor gamma value is set automatically.
• When the "Use Color Matching" option is off, the monitor gamma is set to the following values.
Windows: 1.8
Macintosh: 1.8
• When the color mode is set to grayscale or black and white, all items are grayed out and unavailable.
• The setting is reflected to all frames of the film loaded into the holder. You cannot set each frame individually.
Color Matching Check Box
Click to add or remove the check mark. The
"Use Color Matching" option is on when the
check mark is present.
FilmGet FS User's Guide
Other Functions
89
1
2
3
4
5