Adjusting Images
Image Adjustment Modes
You can use the image adjustments to correct a preview image if the image quality is not quite to your
satisfaction.
• You cannot use the image adjustment modes when the "Use Color Matching" option is on. See p. 89, "Use
Color Matching," for an explanation of switching the Use Color Matching option.
1
• The image adjustment section is grayed out and adjustments cannot be made when there is no image
displayed in the preview area.
• You can make image adjustments individually for each frame which has a preview image.
Guide to the Image Adjustment Section
2
3
4
[Clear] (Reset All Tabs) button
5
Reset Button inside Tab
• Preview images are scanned as a collection of dots into FilmGet FS. Each dot is assigned brightness and color
values. You can correct the image by applying various adjustments to this data.
72
FilmGet FS User's Guide
Channel Selection Panel
Adjustment Mode Tabs
Adjustment Settings Area
This is where the actual settings for each
image adjustment mode are set and
displayed. Refer to the topics for each mode
for an explanation of the settings.
RGB Values Display
[Save...] button
[Load...] button