Macintosh Setup
System Requirements
The computer you use to run FilmGet FS must meet the following minimum requirements. Check your
computer and install FilmGet FS onto the hard disk drive.
Computer
Operating System
CPU
RAM
Display
Interface
Hard Disk Capacity
CD-ROM Drive
Required Application
Program
• Operation is not guaranteed on Macintosh-compatible computers.
• Only one CanoScan scanner may be connected to a computer at a time.
• Please note that the system may become unstable because the computer's energy saving mode
(sleep mode) is not supported.
Installing FilmGet FS
Install FilmGet FS according to the instructions in "1. Installing the Software" of "Chapter 3
Using the Scanner with a Macintosh" in Getting Started supplied with the scanner.
USB connection: Macintosh with standard USB configuration
SCSI connection: Macintosh with standard SCSI configuration or
SCSI card installed
Mac OS 8.6 - 9.1
Power PC G3 or greater
64 MB or more (128 MB or more recommended)
32,000 colors or better, 800 x 600 pixels or better
USB 1.1/SCSI II
500 MB or more (1 GB or more recommended) available after
installing the application program
Required
Photoshop LE or other plug-in compliant application program
Before Scanning
FilmGet FS User's Guide
1
2
3
4
5
21