Table of Contents
Advertisement
Reset and [Clear] Buttons
There are two reset buttons: one inside each tab and one at the bottom of the dialog.
Reset Button inside Tab
[Clear] (Reset All Tabs) button at Bottom
• Reset Button inside Tab
Click this button to reset all the settings in the particular tab to the default values. If the tab has
channel settings, this button only resets the default values for the selected channel.
• [Clear] (Reset All Tabs) button at Bottom
Click this button to reset all the settings for all the adjustment modes to the default values.
[Save...] button
You can save settings in a file for future reuse if you are going to rescan the same image. The files are
saved with the following extensions depending upon the color mode. If you are using a Macintosh,
the extension (".adc", etc.) is not used.
42-Bit and 24-Bit Color
14-Bit and 8-Bit Grayscale
Black and White
[Load...] button
Click this button to load a settings file that has been saved using the [Save...] button.
RGB Values Display
This display shows the color (RGB) values for the area of the preview image under
the mouse cursor. The values are displayed in the "XXX/YYY" format, where "XXX"
represents the original color values and "YYY" represents the adjusted color
values.
[filename.adc]
[filename.adg]
[filename.adb]
FilmGet FS User's Guide
Adjusting Images
75
1
2
3
4
5
Hide quick links:
Advertisement
Table of Contents
