Appendices
Q21
Cannot clean up dust/scratches.
A1
A2
1
A3
2
3
4
5
104
FilmGet FS User's Guide
Click the [Settings] menu, select [Clean Dust] and set the "Clean/Dust
Scratchs" option to [On (strong)]. See p. 87.
If using a film sleeve, make sure that the space between frames is aligned
with the pillar in the film holder.
See "Chapter 5 Setting the Film in Position" in Getting Started for information on
how to load the film.
Set the width of the scanning area to at least 10 mm. See p. 47.