Scanning
Thumbnail Scanning
Once you have selected the film type and color mode, you should make a thumbnail scan of all the
frames of the film loaded into the film holder.
Displaying the Thumbnail Window
When the thumbnail window is hidden, click the [Thumbnail...] button in the main window to display
the thumbnail window.
1
Initiating a Thumbnail Scan
Click the [Thumbnail Scan] button in the thumbnail window. All the film frames will be scanned and
the images displayed as thumbnail images (small images).
2
3
• The scanner may take a few moments to respond to the [Cancel] button when it is clicked during thumbnail
scanning.
4
• If the "Insufficient hard disk space" message or a similar message appears during the thumbnail scan, it
means that your hard drive is too full to store the data for the thumbnail scan. Delete unnecessary files from the
hard drive to free sufficient space and reinitiate the thumbnail scan.
• When all of the thumbnail images are displayed, the [Thumbnail Scan] button is grayed out and thumbnail
scanning is not available.
5
36
FilmGet FS User's Guide
The thumbnail scan progress bar will be
displayed. Click the [Cancel] button if you
wish to stop the thumbnail scan.