Table of Contents
Advertisement
QUICK START
1
2
3
4
5
12
FilmGet FS User's Guide
3
Load the film. See p. 30.
(1) Hold the film holder horizontally
with the
mark facing
upwards.
(2) Check that the [R] mark can be seen
properly from the right side.
4
Set the film type and color mode. See pp. 33 to 35.
(1) Click the main window to switch the window.
(2) Select a film type (color/
monochrome, negative/positive) that
matches the film you are scanning.
(3) Set the color mode (color, grayscale,
or black and white).
5
Make a thumbnail scan of all the frames on the film. See p. 36.
(1) Click the [Thumbnail...] button in the main window to display the
thumbnail window.
(2) Click the [Thumbnail Scan] button in the thumbnail window.
The thumbnail scan progress bar
will be displayed. Click the
[Cancel] button if you wish to
stop the thumbnail scan.
(3) Insert the end with the
mark into the film
holder slot of the
scanner.
Hide quick links:
Advertisement
Table of Contents
