Panasonic CF-S10 Series Operating Instructions Manual page 84

Troubleshooting
15
At the confirmation message,
select [Yes] and press
16
Select OS (32bit or 64bit) and
click [OK].
17
Click [OK].
•
Reinstallation starts.
•
Do not interrupt reinstallation, for example by
turning off the computer.
18
When ending screen is
displayed, click [OK].
The computer is turned off.
19
Turn on the computer and
perform the "First-time
Operation" (
Setting Guide).
20
Start the Setup Utility and
change the settings as
necessary.
21
If you can connect to the
Internet, click
Programs] - [Windows Update]
to perform Windows Update.
84
Reinstalling Software
Preparation and

[Start] - [All
•
If a Windows version (32-bit or 64-bit) is
selected in step 16 that is different from the
.
versions of the Recovery Disc, create a system
repair disc (example: the Recovery Disc is for
the 64-bit version, but the 32-bit version was
installed). The system repair disc is used in cases
such as when [System Recovery Options] cannot
be started up from the hard disk.
If the same Windows version as the Recovery
Disc was installed, you do not need to create a
system repair disc.
Creating a system repair disc:
1 Click
your computer].
2 Click [Create a system repair disc].
3 Set a disc into the CD/DVD drive and click
[Create disc].
When creating the system repair disc is
completed, click [Close].
Refer to "Hard Disk Backup/Restore Function"
(  page 80) to display [System Recovery
Options].
CAUTION
•
When using a model with Microsoft
preinstalled
•
If you reinstall Windows using the HDD
recovery partition data on the hard disk or the
Recovery Disc that you created, the Microsoft
Office software application is also installed.
You do not need to perform setup using the
Microsoft
(Start) -[Control Panel] - [Back up
®
®
Office disc.
Office
®