Panasonic CF-S10 Series Operating Instructions Manual page 83

9
Press or
[Panasonic] boot screen is
displayed to start up the Setup
Utility.
10
Using either
11
Using either
[Repair Your Computer] and
press .
12
Click [Reinstall Windows] and
click [Next].
If you select [Cancel], the reinstallation will be
canceled.
13
Click [Yes, I agree to the
provisions above and wish to
continue!] and click [Next].
(All of the screens below are only examples.)
14
Make a selection from the menu
and click [Next].
while
or , select [Exit].
or , select
•
[Reinstall Windows to the whole Hard
Disk to factory default].
HDD recovery partition
Recovery partition
C drive Returns to the factory
default contents
Installation using the recovery
data
Select this option when you want to
reinstall Windows to the factory default.
After reinstallation, you can create a new
partition. For how to create a new partition,
refer to "Changing Hard Disk Partitions"
(  page 61)
•
[Reinstall to the System and OS
partitions.].
Select this option when the hard disk has
already been divided into several partitions.
For how to create a new partition, refer to
"Changing Hard Disk Partitions" (  page
61).
[Before reinstallation]
The hard disk is divided into multiple
partitions for use.
HDD recovery partition
Recovery partition
C drive
[After reinstallation]
Returns to the factory
default contents
C drive
(Partition for the OS:
40 GB or more is
required)
Installation using the recovery
data
Select this option if the hard disk is divided
into multiple partitions for use, you do not want
to change the hard disk configuration, and you
want to preserve the data on the partitions
other than the C drive.
Data may be erased by unexpected
malfunctions or incorrect operations. Be
sure to back up the data in advance. If
Windows cannot be reinstalled to the system
partition and OS partition, the [[2] Reinstall
to the System and OS partitions.] item is not
displayed.
D drive
Remains
the same
as before
reinstallation
D drive
83