Panasonic CF-S10 Series Operating Instructions Manual page 22

Names and Functions of Parts
A
B
C
D
E
Names
A
LAN Port
DC-IN
B
Jack
Ventilation Hole
C
(Exhaust)
D
HDMI Port
E
USB 2.0 Ports
Wireless Antenna
F
(built-in)
G Touch Pad
H Microphone Jack
I
Headphone Jack
22
Connect the LAN cable.

Reference Manual "
Connect the AC adaptor.
Releases internal heat.
Connect the HDMI display (Television etc.)

Reference Manual "
Connect the USB cable. These ports are compatible with USB 1.1/2.0.

Reference Manual "
This computer has a built-in antenna for wireless communications.

Reference Manual "
 Preparation and Setting Guide

Reference Manual "
Use only a condenser microphone.
Using an input source other than a condenser microphone may not allow audio
to be input or may damage the computer.
•
When using a monaural microphone with a 2-terminal plug:
Click (Start) - [Control Panel] - [Hardware and Sound] - [Sound] -
[Recording] - [Microphone] - [Properties], and then add a check mark for
[Mono Microphone] in [Enhancements].
•
When recording in stereo using a stereo microphone after following the above
steps:
Click (Start) - [Control Panel] - [Hardware and Sound] - [Sound]- [Recording]
- [Microphone] - [Properties], and then remove a check mark of [Mono
Microphone] in [Enhancements].
You can connect headphones or amplified speakers.
When they are connected, audio from the internal speaker is not heard.
Functions/Reference
(Internet)"
(Peripherals)"
(Peripherals)"
(Wireless)"
(Touch Pad)"
F
G
H
I