Nothing Is Displayed On The Screen - Panasonic CF-S10 Series Operating Instructions Manual

Question
Nothing is displayed
on the screen.
If the power indicator is lit, the display is turned off.
Press a key with no independent effect, such as
that may make a selection (
and so on).
The display destination may be set to the external display.
Try changing the display destination by pressing
If you want to switch the display destination repeatedly by pressing
or + , make sure that the display destination has switched completely each
time before pressing
The screen may become darker.
to make the screen brighter. (  page 25)
Press +
If the power indicator
entered.
Slide the power switch.
If an additional RAM module has been inserted or changed, RAM module
may be inserted correctly.
Power off your computer, check that the RAM module is the recommended
module, and insert it the module correctly.
If the problem persists, contact your technical support office.
Measure
, (Space),
+ or + again.
is blinking or is not lit, the sleep or hibernation is
or . Do not use a key
, , , numeric keys,
+ or + .
+
73