Panasonic CF-S10 Series Operating Instructions Manual page 56

Setup Utility
Menu
Password On
Resume
Boot Device
On Hibernation
Resume
Menu
Set Supervisor
Password
Hard Disk Lock Select whether to enable (Enable) or disable (Disable) the Hard Disk Lock.
User Password
Protection
Set User
Password
Menu
Intel(R)
Anti-Theft
Technology
Suspend mode
transition
56
Set the entry of the supervisor password or user password when the
computer resumes from sleep or hibernation to be required (Enabled)
or not be required (Disabled); or, when [Intel(R) Anti-Theft Technology] is
set to [Active] only, to not be required (Auto). This can only be set when
[Password On Boot] is set to [Enabled] or [Auto].
Set whether to only use the internal hard disk as the startup device when
the computer resumes from hibernation, or to try starting up from other
devices with a higher priority than the internal hard disk.
Set a Supervisor Password if you wish to prevent any unauthorized
changes to the Setup Utility settings, also if you require a password
on boot, set [Password on boot] to [Enable] after you set Supervisor
Password.
This function will not work without the Supervisor Password being set.
Select whether to permit changing the User Password ([Protected]) or not
([No Protection]).
Set User Password when multiple users use this computer, etc.
This function will not work without the Supervisor Password being set.
Also, if the user password is entered when you start up the Setup Utility,
some of the settings cannot be changed.
This item cannot be changed.
Intel(R) Anti-Theft Technology is technology made by Intel
countermeasure against theft. It prevents information leaks by turning off
the computer and preventing startup in an emergency, such as when the
computer is stolen, and erases the key data that is required for accessing
encrypted data.
To use Intel ® Anti-Theft Technology, a special solution provided by a service
provider is required. For details such as the operation method, contact your
service provider.
Set whether to put the computer to sleep (Enabled) or not to put it to sleep
(Disabled) when using Intel(R) Anti-Theft Technology.
This can only be set when [Intel(R) Anti-Theft Technology] is set to [Active]
or [Suspend].
Functions
Functions
Functions
Settings
Disabled
Enabled
Auto
Try prior
devices
Hard Disk only
Settings
Enter the
sub-menu.
Disabled
Enabled
No Protection
Protected
Enter the
sub-menu.
Settings
Inactive
®
as a Active
Stolen
Suspend
Disabled
Enabled