Panasonic CF-S10 Series Operating Instructions Manual page 21

Names
J USB 3.0 Port
K PC Card Slot
SD Memory Card
L
Slot
Drive Power/
M Open Switch
OFF/ON
N CD/DVD Drive
B
C
D
A Battery Latches
B Battery Pack
C
RAM Module Slot
D
Emergency Hole
•
To insert
Slide the battery pack in parallel with the arrow
direction and attach it so that the left and right dents
on the new battery pack match the projections of the
computer.
Dent
Connect the USB cable. This port is compatible with USB 1.1/2.0/3.0.

Reference Manual "

Reference Manual "
The slot only accepts SD/SDHC/SDXC memory cards.

Reference Manual "
•
Slide the switch to the right to open the disc cover. (This works only when the
power is on.)
•
Each time you slide the switch to the left, the drive power will turn on or off.
(This works only when Windows has started up.)
 page 41,
Reference Manual "
These latches are locked automatically when inserting the battery pack properly.

Reference Manual " (Battery)"
Follow the procedures below to insert/remove the battery pack.
Insert the RAM module.  page 46
To remove a disc when the disc cover cannot be opened or when the computer
is powered off, insert a pointed object (e.g., the bent-out tip of a paper clip, or
the tip of a ballpoint pen) into the emergency hole.
 page 43
Dent
Projections
Functions/Reference
(Peripheral)"
(Peripheral)"
(Peripheral)"
(CD/DVD Drive)"
A
•
To remove
Slide both the left and right latches to the
unlocked position
battery pack in parallel with the computer.
, and push out the
21