Panasonic CF-S10 Series Operating Instructions Manual page 57

Menu
Embedded Displays a sub-menu related to the settings of Embedded Security (TPM).
Security (TPM) This function will not work without the Supervisor Password being set.
•
Sub-Menu Protection
Select whether to permit changing the Embedded Security (TPM) or
not.
Factory presets: [Protected]
•
TPM State
Select whether to use the TPM ([Enabled]) or not ([Disabled]).
Factory presets:[Disabled]
•
Pending TPM operation
When [Clear TPM Owner] is selected, the owner information held within
Embedded Security (TPM) is initialized, and data that was protected by
Embedded Security (TPM) cannot be restored or used. Use this before
disposing of the computer or giving it to someone else.
•
Current TPM Status Information
To display the current TPM status information.
This items cannot be selected or changed.
Press
Setting the Password in the Setup Utility
When a password is set in the Setup Utility, password entry is required when you start up the Setup
Utility. Also, when [Password On Boot] is set to [Enabled] or [Auto]*
immediately after you turn on the computer, which prevents unauthorized use by a third party.
Before configuring the setting, be sure to refer to
*4 When [Password On Boot] is set to [Auto] and Intel(R) Anti-Theft Technology is being used, password entry
is not required.
To check whether or not Intel(R) Anti-Theft Technology is being used, refer to [Intel(R) Anti-Theft Technology]
in the [Security] menu of the Setup Utility. If Intel(R) Anti-Theft Technology is being used, [Active] is
displayed.
1
Turn on or restart the computer.
2
Press while [Panasonic] boot screen is displayed soon after the
computer begins the startup procedure.
When the password is set, the screen will be displayed.
3
Select [Security] using
To set the supervisor password:
Select [Set Supervisor Password] using
To set the user password:
Select [Set User Password] using
•
When the Supervisor Password has not been set, the User Password cannot be set. Set the Supervisor
Password if you have not done so.
Functions
to close the sub-menu.
or .
or
or , and press
4
, password entry is required
Reference Manual "
, and press .
.
Settings
Enter the
sub-menu.
(Security)."
57