Routine Cleaning
If the original is not copied clearly, clean the following parts of the machine. For
high-quality printouts, we recommend cleaning these parts once or twice a month.
•
Platen glass
•
Underside of the feeder
•
Feeder scanning area
•
Document Feeding Roller
WARNING
•
Do not use alcohol, benzene, paint thinner, or other solvents for cleaning. Doing
so may result in damage to the plastic parts.
•
Disconnect the power cord from the power outlet regularly, and clean the area
around the base of the power plug's metal pins and the power outlet with a dry
cloth to ensure that all dust and grime is removed. If the power cord is
connected for a long period of time in a damp, dusty, or smoky location, dust
can build up around the power plug and become damp. This may cause a short
circuit and result in a fire.
CAUTION
Do not dampen the cloth too much, as this may damage the original or break the
machine.
IMPORTANT
•
Sending or receiving documents cannot be done when the main power switch is OFF.
•
Any sent or received documents stored in the memory are backed up for about 60
minutes. If the machine is turned OFF.
Routine Cleaning
6-23
6