Canon imageCLASS MF7280 Reference Manual page 50

Printing
This machine uses UFR II (Ultra Fast
Rendering II) Technology, which utilizes a
newly invented printing algorithm to
minimize file processing and achieve
maximum performance. Also the PCL
Printer enables you to use the machine as
an emulation printer of PCL5e and PCL6.
Network Interface
This machine can be connected to a
network using Ethernet (standard
equipment). Connecting to a network
enables you to use utility software, including
the Remote UI, NetSpot*, NetSpot Console,
etc.
NetSpot enables you to manage and make
various settings for the printers and copiers
connected to a network from a PC. NetSpot
Console enables you to perform the same
operations as NetSpot, but from a Web
browser.
*NetSpot and NetSpot Console can be
downloaded from Cannon's Web site (http://
www.usa.canon.com).
Using the Remote UI
You can control functions, such as
confirming the status of the machine, job
operations, and printing instructions, all
from your PC's Web browser.
The imageCLASS MF7280 comes standard
equipped with a direct Ethernet connection
interface. Once the Ethernet interface port
is configured properly, the imageCLASS
MF7280 can be controlled and set up
through the Remote UI and network. Also,
you can use the Remote UI to fax from your
PC using the Ethernet connection. For
instructions on configuring the Ethernet
port, see the Network Guide.
See the PCL/UFR II Printer Guide
Sending data
from computers
See the Network Guide
Device Information
Manage
See the Remote UI Guide
Web
Browser
What This Machine Can Do
Printing
2
2-3