Control Panel Power Switch - Canon imageCLASS MF7280 Reference Manual

Control Panel Power Switch

You can set the machine to enter the Sleep mode whenever you desire, by pressing
the control panel power switch, or specify to have the machine enter the Sleep
mode at a preset time. (See "Auto Sleep Time,"on p. 3-53.)
1 Press the control panel power switch to cancel the Sleep mode and resume normal
machine operations.
NOTE
•
The machine can receive and print documents from a personal computer when it is in the
Sleep mode. I-Fax/Fax documents can also be received while the machine is in the Sleep
mode.
•
The energy consumption while the machine is in the Sleep mode can be set from the
Additional Functions screen. (See "Energy Consumption in the Sleep Mode," on p. 3-32.)
•
The machine will not enter the Sleep mode if it is scanning or printing. (See "Auto Sleep
Time," on p. 3-53.)
•
It takes approximately 10 seconds for the machine to recover after the Sleep mode is
deactivated.
•
If Energy Consumption in Sleep Mode is set to 'Low', it may take more than 10 seconds
for the touch panel display to be displayed after pressing the control panel power switch.
1-20 Main Power and Control Panel Power