Routine Cleaning; Cleaning The Platen Glass And Underside Of The Feeder - Canon imageRUNNER ADVANCE C2225 Basic Operation Gude

Routine Cleaning

If the original is not copied clearly, clean the following parts of the machine. For high-quality printouts, we recommend
cleaning these parts once or twice a month.
●
■ Platen■glass
●
■ Underside■of■the■feeder
●
■ Feeder's■rollers
• When cleaning the machine, first turn OFF the main power switch, and disconnect the power cord . Failure to
observe these steps may result in a fire or electrical shock .
• Disconnect the power cord from the power outlet regularly, and clean the area around the base of the power
plug's metal pins and the power outlet with a dry cloth to ensure that all dust and grime is removed . If the
power cord is connected for a long period of time in a damp, dusty, or smoky location, dust can build up
around the power plug and become damp . This may cause a short circuit and result in a fire .
• When cleaning with a cloth, do not dampen it too much, as this may damage the original or break the machine.
• Do not use alcohol, benzene, paint thinner, or other solvents for cleaning. Doing so may result in damage to the plastic
parts.

Cleaning the Platen Glass and Underside of the Feeder

If the platen glass or the underside of the feeder is dirty, the original may not be scanned clearly, or the size of the original
may be detected incorrectly. Clean the platen glass and the underside of the feeder by following the procedure below.
1
1
Clean the platen glass and the underside of the feeder with a cloth which is
wrung after being dampened in water or a mild detergent, and then wipe them
clean with a soft, dry cloth .
\
92
2
1
1.■ Clean■the■platen■glass.
Also, clean the feeder scanning
area (thin glass strip).
2.■ Clean■the■underside■of■the■
feeder.