Cleaning and Adjusting the Machine
This section describes the introductions of routine cleaning and the settings to
improve the print quality and to prevent paper jams which may occur when a variety
of functions are used.
Use of these settings will help you to clean the machine or to prevent a number of
problems before they occur.
3
Cleaning
Routine cleaning is needed for the long use of the machine. For more information
on the routine cleaning, see "Routine Cleaning," on p. 6-23. You can clean the
machine by the following settings:
■ Transfer Roller Cleaning
Clean the transcription roller in the main unit when the backside of paper is smudged with
printing. See "Transfer Roller Cleaning," on p. 6-30.
■ Fixing Unit Cleaning
Clean the fixing unit in the main unit when black streaks appear with printing or you
replace the cartridges. See "Fixing Unit Cleaning," on p. 6-32.
■ Feeder Cleaning
Clean the roller of the feeder when your originals have black streaks or appear dirty after
scanning them. See "Automatic Feeder Cleaning," on p. 6-37.
3-56
Cleaning and Adjusting the Machine