3
3
4
3-58
Cleaning and Adjusting the Machine
Select [Normal], [Low], or [High]➞ press [OK].
Details of each item are shown below:
[Normal]: In normal circumstances, use the default setting. Outputs can be
printed with the normal density.
[Low]:
Compensate for poor print quality that occurs when printing on the
paper that was stored for a long period of time at high temperature
and high humidity.
Also effective when the machine's fixing unit does not properly feed
the paper that contains a lot of moisture.
[High]:
Compensate for poor quality that occurs when printing on the
heavyweight paper.
The selected mode is set.
Press [Done] repeatedly until the Basic Features screen
appears.