Overview Of The Imageclass Mf7280; Switching The Functions Indicated On The Touch Panel Display - Canon imageCLASS MF7280 Reference Manual

Overview of the imageCLASS MF7280

Most operations on this machine are executed from the touch panel display. By
pressing the keys according to the instructions on the touch panel display, you can
utilize the functions of this machine efficiently.
CAUTION
Press the touch panel display keys gently with your fingers. Do not press the
touch panel display with a pencil, ballpoint pen, or other sharp objects that can
scratch the surface of the touch panel display. Doing so may damage the touch
panel display.
NOTE
Before using the touch panel display, peel off the protective film from the display.
Switching the Functions Indicated on the Touch Panel
Display
After the power is turned ON, the following screen appears on the touch panel
display. You can press
[System Monitor] on the touch panel display to switch functions. (See "Initial
Function at Power ON," on p. 3-15.)
The area on the bottom of the touch panel display is used for messages that
indicate the status of the machine. Pressing [System Monitor] enables you to check
the status of the various devices, jobs, and consumables, and they are also
displayed here.
NOTE
You can set the initial screen (the first screen that appears when the machine is turned
ON) from the Additional Functions screen. The initial screen can be the Copy, Send, or
System Monitor screen.
(COPY) or (SEND) on the control panel, or

Overview of the imageCLASS MF7280

2
2-5