Canon imageCLASS MF7280 Reference Manual page 110

2
Select [Initial Function] or [Selected Function] ➞ press [OK].
Details of each item are shown below.
[Initial Function]:
[Selected Function]:
The selected mode is set.
3
Press [Done] repeatedly until the Basic Features screen
appears.
The screen specified as the initial function is displayed
after the Auto Clear mode initiates. For example, if you
set the System Monitor screen as the initial screen, and
Auto Clear initiates while a settings screen for the Send
function is shown, the display returns to the System
Monitor screen.
The display returns to the main screen of the function
that was displayed before the Auto Clear mode
activated. For example, if you set the System Monitor
screen as the initial screen, and Auto Clear initiates while
a settings screen for the Send function is shown, the
display returns to the Send Basic Features screen.
Specifying Common Settings
3
3-19