Canon imageCLASS MF7280 Reference Manual page 42

3
1
1-16 Main Power and Control Panel Power
The screen shown below is displayed while the system
software is loading.
❑
The Start Up screen is displayed until the machine is ready to scan.
If a message is displayed on the touch panel display, proceed to step 4.
The screen below is displayed when the machine is ready to scan.
IMPORTANT
•
If you turn OFF the main power, wait at least 10 seconds before turning the main
power back ON.
•
Do not turn the main power OFF if you want to be able to send or receive fax
documents. Sending or receiving fax documents cannot be done when the main
power is turned OFF.
•
If User ID Management is set to 'On', the machine will take longer to become ready
to scan.