Toner Smudges And Spatters Appear Around Text And Images; The Bottom Edge Of Paper Or Following Paper Has Smudge Marks - Canon imageCLASS D1370 Basic Operation Manual

Toner Smudges and Spatters Appear around Text and Images

Try one of the following to solve the problem.
<Cause 1> The paper type loaded is not appropriate.
Solution
<Cause 2> Due to the paper type (for example, heavy paper) or usage conditions (for example, dry conditions), toner
smudges and spatters appear on the output.
Solution

The Bottom Edge of Paper or Following Paper Has Smudge Marks

Perform following procedure.
<Cause> A document with no margins was printed.
Solution 1
Solution 2
9-18
Make sure that the number of sheets or the paper type loaded in the paper drawer or multi-purpose tray meets the
paper specifications.
e-Manual → Specifications → Paper → Supported Paper Types
Change the <Special Mode U> setting to <On> from the operation panel.
e-Manual → Maintenance → Special Mode
* Set this setting to <Off> unless the above mentioned problem occurs.
* The print quality may become lower when this setting is enabled, depending on the paper type used (for example,
thin paper) or usage conditions (humid conditions).
Data is printed with a margin of 5 mm (10 mm for envelopes). Provide a margin around the data.
"Printable Area" (→P. 2-8)
Perform the following procedure in the printer driver.
1. Display the [Finishing] sheet.
2. Click [Advanced Setting].
3. Set [Enlarge Print Area] to [Off ].