Reduce Rx Size; Rx Page Footer; Continue Printing When Toner Is Low; The Steps To Take For Configuring The System Settings - Canon imageCLASS D1370 Basic Operation Manual

Reduce RX Size

Enable this option to scale the image to fit on the selected
paper size or reduce the image by a specific percentage
when you receive a fax.
How to access the option
[ ] (Menu) → <Fax Settings> →<RX Print Settings>
→ <Reduce RX Size>
Settings
(Bold: Default setting)
Off
Reduction Ratio:
Auto, 97%, 95%,
90%, 75%
On
Reduction Method:
Vertical/Horizontal,
Vertical Only

RX Page Footer

Specify whether to print the reception date, time, job ID,
and page number at the bottom of the page when printing
received faxes.
How to access the option
[ ](Menu) → <Fax Settings> → <RX Print Settings>
→ <RX Page Footer>
Settings
(Bold: Default setting)
Off
Do not print the page footer.
On Print the page footer.

Continue Printing When Toner Is Low

Specify whether to continue printing received faxes when
the toner is nearly empty.
IMPORTANT
If <Continue Printing When Toner Is Low> is set to <On>
Note that the output may not be clear, as subtle details such as thin
lines and light colors may not be clearly reproduced, due to a small
amount of toner remaining inside the toner cartridge. Plus, faxes
are deleted once they have been printed.
How to access the option
[ ] (Menu) → <Fax Settings> → <RX Print Settings>
→ <Continue Printing When Toner Is Low>
Settings
(Bold: Default setting)
The machine does not continue printing received
Off
faxes.
On The machine continues printing received faxes.
6-26
No image reduction.
<Auto>: Reduce the image
automatically to fit onto the selected
paper size.
<97%>, <95%>, <90%>, <75%>:
Reduce the image by the
predetermined ratio.
<Vertical/Horizontal>: Reduce the
image in vertical and horizontal
directions.
<Vertical Only>: Reduce the image
in the vertical direction only.
The steps to take for configuring the
system settings
Follow the steps in the procedure below to configure the
system settings.
The procedure describes the steps to change the "TX Start
Speed"setting.
Keys to be used for this operation
Menu
1
Press [ ] (Menu).
2
Select <System Settings> using [ ] or [ ] and
press [OK].
Menu
USB Direct Print Se
Printer Settings
Adjustment/Maintena
System Settings
3
Select <Communication Management Settings>
using [ ] or [ ] and press [OK].
System Settings
Device Information
Dept. ID Management
Security Settings
Communication Manage
4
Select <Fax Settings> using [ ] or [ ] and press
[OK].
Communication Mgt. Set
Fax Settings
Memory Lock Settings
5
Select <TX Start Speed> using [ ] or [ ] and
press [OK].
Fax Settings
TX Start Speed
RX Start Speed
6
Select the send start speed using [ ] or [ ] and
press [OK].
TX Start Speed
33600 bps
14400 bps
9600 bps
7200 bps
* Select <Apply> when <Apply> appears on the screen after you
have specified the setting and press [OK].
OK
. . .
. . .
...
...