Changing The Default Fax Settings - Canon imageCLASS D1370 Basic Operation Manual

Changing the Default Fax Settings

The default settings are a set of standard settings
predetermined by the machine. These settings become
effective when the machine is turned ON and OFF, or when
[ ] (Reset) is pressed to revert to the default settings.
You can change the following default settings based on your
needs.
• Resolution
• Density
• 2-Sided Original
• Sharpness
Keys to be used for this operation
Menu
1
Press [ ] (Menu).
2
Select <Fax Settings> using [ ] or [ ] and press
[OK].
Menu
Timer Settings
Common Settings
Copy Settings
Fax Settings
3
Select <TX Function Settings> using [ ] or [ ]
and press [OK].
Fax Settings
Basic Settings
TX Function Settings
RX Function Settings
RX Print Settings
4
Select <Change Defaults> using [ ] or [ ] and
press [OK].
TX Function Settings
Change Defaults
Register Unit Name
ECM TX
Pause Time
OK
...
5
Select the item using [ ] or [ ] and press [OK].
• Resolution/Density/Sharpness
For more information, see "Changing the Scan Settings (Fax)"
(→P. 6-3)
Change Defaults
<Apply>
Resolution: 200 x 10
Density: 0 + -
2-Sided Original: O
6
Select <Apply> using [ ] or [ ] after you have
specified the setting and press [OK].
Change Defaults
<Apply>
Resolution: 200 x 1
Density: 0 + -
2-Sided Original: O
7
Press [ ] (Menu) to close the menu screen.
...
...
...
6-21