Fax/Tel Mode - Canon imageCLASS D1370 Basic Operation Manual

Fax/Tel mode

You can receive faxes automatically (The telephone rings on an incoming call). To disable audible incoming rings, see
"Incoming Ring" (→P. 6-25)
You can answer incoming calls by picking up the handset.
Operation for when an incoming call is received
When you do not pick up the handset
within the specified number of times
The machine judges whether the
incoming call is a fax or voice call.
When the call is
a fax
The machine receives
the fax automatically.
When you pick up the
handset during ringing
You can start talking as is.
* You can change the incoming call ring time using "Incoming Ring" (→P. 6-25)
1
* To set a ring delay before the telephone starts ringing on an incoming call, go to the <Ring Start Time> option.
2
* To adjust the incoming call ring time, go to the <Incoming Ring Time> option.
3
* To specify how the machine behaves when you do not answer an incoming call, go to the <Action After Ring> option.
4
For more information on these options, see "Advanced Settings for the Fax/Tel Auto Switch Mode" (→P. 6-14)
6-12
An incoming call rings for the specified number of times.
When the call is
a voice call
The telephone rings.
When you do not pick up
the handset during ringing
The machine hangs up the
telephone or switches to the fax
receive mode.
When you pick up the handset within
the specified number of times
When the call is a fax
You can hear a
beep.Following the
procedure below, receive the
fax.
(1) Press [Fax].
(2) Select <Start Receiving>
using [ ] or [ ] and
press [OK].
(3) Hang up the handset.
*2
*3
*4
*1
When the call
is a voice call
You can start
talking as is.