Relocating The Machine - Canon imageCLASS D1370 Basic Operation Manual

Relocating the Machine

Before transporting the machine, see "Precautions When
Relocating the Machine" (→P. 8-15)
Follow the steps in the procedure below to relocate the
machine somewhere else for maintenance and other purposes.
1
Turn the power OFF, then disconnect the cables
and cord from the machine.
(4)
(7)
(2)
<How to remove the cables and cord>
USB cable*
LAN cable*
Power cord
Telephone cables*
* W hether the cable is connected or not varies depending on
your environment.
2
If you are using the multi-purpose tray, close it.
3
Pull out the paper drawer.
8-14
(2)
O F F (5)
(3)
(6)
(1)
(2) Turn the computer off.
(3) Remove it from the machine.
(4) Remove it from the machine.
(5) U nplug the power plug from the
AC power outlet.
(6) Remove it from the machine.
(7) Remove it from the machine.
4
Carry the machine to the new installation site.
After making sure that the cover and tray are closed, hold the
handle on the front to lift and transport the machine. Check the
weight of the machine so it can be carried safely.
When the optional paper feeder is installed
Remove the paper feeder from the machine, install it in the new
installation site, then transport the machine.
* D o not carry the machine with the paper feeder installed. If you
do so, the paper feeder may drop, resulting in personal injury.
5
Put the machine down carefully at the new
installation site.
NOTE
Installation procedures
See the Starter Guide that comes with the machine.
When transporting the machine long distance
To prevent damage to the machine during transport,
perform the following.
• Remove the toner cartridges
* "Storing Toner Cartridges" (→P. 8-7)
• Securely pack the printer in the original box with
packing materials
* If the original box and packing materials are not available,
find an appropriate box along with packing materials and
pack the machine and the parts appropriately.