Options; Tx Start Speed; Rx Start Speed; Memory Lock Settings - Canon imageCLASS D1370 Basic Operation Manual

7
Press [ ] (Menu) to close the menu screen.
The procedure is complete.

Options

Configure the following options to receive a fax.
System Settings
Communication
Fax Settings
Management
Settings
"Memory Lock Settings" (→P. 6-27)
" Select Country/Region" (→P. 6-27)
"Address Book PIN" (→P. 6-27)
"Restrict New Destinations" (→P. 6-28)
"Allow Fax Driver TX" (→P. 6-28)
Restrict TX
Function
"Restrict History TX" (→P. 6-28)
"Fax No. Confirmation Re-Entry" (→P. 6-28)
"Restrict Sequential Broadcast" (→P. 6-28)

TX Start Speed

Change the transmission start speed if you are experiencing
a transmission problem.
How to access the option
[ ](Menu) → <System Settings> → <Communication
Management Settings> → <Fax Settings> → <TX Start
Speed>
Settings
(Bold: Default setting)
33600 bps, 14400 bps, 9600 bps,
7200 bps, 4800 bps, 2400 bps

RX Start Speed

Change the reception start speed if you are experiencing a
problem.
How to access the option
[ ] →
(Menu) <System Settings>
→
Management Settings>
Speed>
Setting
(Bold: Default setting)
33600 bps, 14400 bps, 9600 bps,
7200 bps, 4800 bps, 2400 bps

Memory Lock Settings

Normally, received documents are immediately printed. However,
you can specify whether or not to store received faxes in memory
before printing. You can then print the stored faxes at any time or
delete them without printing to save paper.
How to access the option
→
[ ]
(Menu) <System Settings>
→
Management Settings>
* I f <Memory Lock PIN> is specified, use the numeric keys
[ ] to [ ] to enter those numbers, and then press [OK].
"TX Start Speed" (→P. 6-27)
" RX Start Speed" (→P. 6-27)
→
<Communication
→
<Fax Settings> <RX Start
→
<Communication
<Memory Lock Settings> (*)
Settings
(Boldface: Default setting)
Off
Disable Memory Lock.
Memory
Once the PIN is set, you are prompted to
Lock PIN:
enter it every time you change or
Seven-digit
disable the Memory Lock mode settings.
number
Specify whether to print the RX result
Print Report: report when receiving a fax.
On Off, On Activate "Receive Results (D1370/D1350
Only)" to enable this setting.
When <On> is set, received faxes are
Memory stored in memory only for a specified
Lock Time : length of time.
Off, On
Set <Memory Lock Start Time> and
<Memory Lock End Time> respectively.
NOTE
Memory Lock PIN
• Press [OK] without entering any numbers when you do not want
to set the PIN.
• You cannot set a PIN consisting only of <0> (<0000000>).
• When you set a PIN starting with <0>, the PIN is set in the
following manner.
Example: When you enter <02> or <002>, the PIN is set as
<0000002>.
Memory Lock Settings operations
• When memory lock settings are changed from <On> to <Off>,
the documents saved in the memory up to then are combined
and printed.
"Combining and Printing the Received Documents You
Saved" (→P. 6-18)
• At <Memory Lock End Time>, you can combine and print
received documents saved in the memory from the <Memory
Lock Start Time> to the <Memory Lock End Time>.

Select Country/Region

Specify the country or region where the machine is used.
IMPORTANT
After you have configured the option
Restart the machine to take effect the changes.
How to access the option
[ ] (Menu) → <System Settings> → <Select Country/
Region>
Setting
(Bold: Default setting)
United States (US), Canada (CA),
Brazil (BR), Mexico (MX), Other

Address Book PIN

Set a PIN to protect the address book. You are prompted to
enter the correct PIN to register, edit, or delete destinations.
How to access the option
[ ] (Menu) → <System Settings> → <Restrict TX
Function> → <Address Book PIN>
How to set a PIN
Enter up to a 7-digit number.
To cancel the entered PIN, clear the numbers and press
[OK].
6-27