Before Replacing The Toner Cartridge; Replacing The Toner Cartridge - Canon imageCLASS D1370 Basic Operation Manual

Before Replacing the Toner Cartridge

Before replacing toner cartridges, see "Precautions When
Replacing Toner Cartridge" (→P. 8-9)
When the toner nearly runs out, follow the steps in the
procedure below before replacing the toner cartridge.
The machine continues printing until the toner runs out
completely.
1
Open the front cover while holding down the
open button.
2
Remove the toner cartridge.
3
Gently shake the toner cartridge five or six times
to evenly distribute the toner inside the cartridge.
8-8
4
Insert the toner cartridge.
Fit (A) on both sides of the toner cartridge into the guides located
on both sides of the machine and slide the toner cartridge into the
machine until the toner cartridge comes to rest and is held against
the back of the machine.
(A)
5
Close the front cover.
If you cannot close the front cover
Make sure that the toner cartridge is installed correctly. Do not
try to forcefully close the toner cover, as this may damage the
machine.
If there are white lines in the print result or it is blurred or
distorted even though the above operations have been
performed, replace the toner cartridge with a new one.
"Replacing the Toner Cartridge" (→P. 8-8)

Replacing the Toner Cartridge

Before replacing toner cartridges, see "Precautions When
Replacing Toner Cartridge" (→P. 8-9)
1
Open the front cover while holding down the
open button.
(A)