Note: Your machine may not match the images provided exactly.
1. Unplug the AC Adapter from the wall outlet and machine.
2. Using a 6mm hex wrench, remove the indicated hardware from the
Right Upper Handlebar and place it out of the work area.
Note: Be aware that the Right Upper Handlebar must be supported when
removing the hardware.
3. Using a #2 Phillips screwdriver, remove the 4 screws (2 indicated on
one side) from the Upper Shroud and remove it.
4. Remove the Right and Left Stabilizer Shrouds from the machine (if
equipped).
Right Stabilizer
Shroud
83
Right Upper
Handlebar
Upper Shroud
Left Stabilizer
Shroud