Bowflex Max Total 16/40 Service Manual page 144

17. Using a #2 Phillips screwdriver, remove the indicated screws
from the Right shroud ( 3 screws on the Right Shroud). Remove the
upper screws labeled ' * ' last.
18. Carefully remove the Right Shroud from the machine.
19. Using a #2 Phillips screwdriver, remove the screws (indicated by ar-
rows) that secure the Upper Body Sensor. Allow the Upper Body Sensor
to hang on the Cable, away from the Right Crank Arm.
Upper Body
Sensor
Note: View into Shrouds from above.
*
Right Side
Right Crank Arm
Note: Shrouds are removed for clarity.
144
Upper Body Sensor
Cable
Upper Body Sensor