1. Unplug the AC Adapter from the wall outlet and machine.
2. Using a 5mm hex wrench, remove the indicated hardware from the Left
Upper Handlebar and place it out of the work area.
Note: Be aware that the Upper Handlebar must be supported when
removing the hardware.
2. Using a #2 Phillips screwdriver, remove the 4 screws (2 indicated on
one side) from the Upper Shroud and remove it.
4. Remove the Right and Left Stabilizer Shrouds from the machine.
Right Stabilizer
Shroud
68
Right Upper
Handlebar
Upper Shroud
Left Stabilizer
Shroud