Switching On The Projector; When The Initial Setting Screen Is Displayed - Panasonic SOLID SHINE PT-VMZ51 Operating Instructions Manual

Switching on the projector

Before switching on the projector, make sure all the other devices are correctly connected (x page 40).
Remove the lens cap beforehand.
1) Connect the power cord to the projector.
2) Connect the power plug to an outlet.
f The power indicator <ON(G)/STANDBY(R)> lights/blinks, and the projector will enter the standby mode.
3) Press the power <v/b> button.
f The power indicator <ON(G)/STANDBY(R)> lights green and the image is soon projected on the screen.
Attention
f Be sure to remove the lens cap before starting projection.
Note
f When the [PROJECTOR SETUP] menu → [ECO MANAGEMENT] → [STANDBY MODE] is set to [ECO], it takes longer for the projection to
start after the power is turned on, compared to when set to [NORMAL].
f When the [PROJECTOR SETUP] menu → [ECO MANAGEMENT] → [QUICK STARTUP] is set to [ON], and the power is turned on before
the specified time elapses after the projector enters the standby mode, an image will be projected approximately one second after the power
is turned on.
The specified time is a time set in the [PROJECTOR SETUP] menu → [ECO MANAGEMENT] → [QUICK STARTUP] → [VALID PERIOD].

When the initial setting screen is displayed

When the projector is switched on for the first time after purchase, the [INITIAL SETTING] screen and the
[ADMINISTRATOR ACCOUNT] screen are displayed in order after the projection starts. When the [PROJECTOR
SETUP] menu → [INITIALIZE ALL] is executed, the [INITIAL SETTING] screen is displayed after the projection
starts. When the [NETWORK] menu → [INITIALIZE] is executed, the [ADMINISTRATOR ACCOUNT] screen is
displayed after the projection starts next time. Set them in accordance with circumstances.
In other occasions, you can change the settings by menu operations.
When the [INITIAL SETTING] screen is displayed, you can return to the previous screen by pressing the
<MENU> button or <RETURN> button.
Note
f When the projector is used for the first time, in order to clearly display the menu screen, it may be necessary to adjust the focus lever and
the zoom lever in the projection lens area of the projector (x page 29). For details, refer to "Adjusting the focus, zoom, and lens shift"
(x page 55).
Initial setting (display language)
Select the language to show on the screen.
After the initial setting, you can change the display language from the [LANGUAGE] menu.
1) Press asqw to select the display language.
Chapter 3 Basic Operations - Switching on/off the projector
2)
1)
3) 3)
ENGLISH - 47