Panasonic SOLID SHINE PT-VMZ51 Operating Instructions Manual page 76

Setting [CORNER CORRECTION]
1) Press as to select [SCREEN ADJUSTMENT].
2) Press the <ENTER> button.
f The [SCREEN ADJUSTMENT] screen is displayed.
3) Press as to select [CORNER CORRECTION].
4) Press the <ENTER> button.
f The [CORNER CORRECTION] screen is displayed.
5) Press as to select the item to adjust. Then press the <ENTER> button.
f The [CORNER CORRECTION] individual adjustment screen is displayed.
6) Press asqw to adjust.
[UPPER LEFT]
Note
f When the [CORNER CORRECTION] individual adjustment screen is displaying, the individual adjustment screen of the next corner can also
be displayed by pressing the <ENTER> button.
f Depending on the correction amount, the image aspect ratio may change.
Setting [CURVED CORRECTION]
1) Press as to select [SCREEN ADJUSTMENT].
2) Press the <ENTER> button.
f The [SCREEN ADJUSTMENT] screen is displayed.
3) Press as to select [CURVED CORRECTION].
4) Press the <ENTER> button.
f The [CURVED CORRECTION] screen is displayed.
5) Press as to select one item to adjust.
[KEYSTONE]
[ARC]
6) Press the <ENTER> button.
f The [KEYSTONE] or the [ARC] individual adjustment screen is displayed.
Adjusting [KEYSTONE]
1) Press asqw to adjust.
f For details, please refer to "Setting [KEYSTONE]" (x page 75)
Adjusting [ARC]
1) Press asqw to adjust.
76 - ENGLISH
Chapter 4 Settings - [POSITION] menu
[CORNER CORRECTION]
[UPPER RIGHT]
Adjusts when the trapezoid of the projected image is distorted.
Adjusts when the radian of the projected image is distorted.
[LOWER LEFT] [LOWER RIGHT]