Connecting With Wireless Lan - Panasonic SOLID SHINE PT-VMZ51 Operating Instructions Manual

4) Perform the detailed setting of [WIRED LAN].
f For details, Refer to "[WIRED LAN]" (x page 105).
Note
f To connect to an existing network, perform after consulting your network administrator.
r Factory default setting
f Following setting has been made as a factory default.
[DHCP]
[IP ADDRESS]
[SUBNET MASK]
[DEFAULT GATEWAY]
[DNS1] / [DNS2]
Operating the computer
1) Turn on the power of the computer.
2) Perform the network setting following the instruction of your network administrator.
f If the projector is in factory default setting, you can use it as it is if the network setting of the computer is as
follows.
[IP ADDRESS]
[SUBNET MASK]
[DEFAULT GATEWAY]

Connecting with wireless LAN

The wireless module (Model No.: AJ-WM50) of the optional accessories is required if you want to use the network
function through the wireless LAN.
Connection example
Preparation and confirmation of the projector
1) Turn on the projector.
2) Attach the wireless module (Model No.: AJ-WM50) of optional accessories firmly into the <USB
(VIEWER/WIRELESS/DC OUT)> terminal.
Wireless module of optional accessories
3) Press the <NETWORK/USB> button to switch to NETWORK input.
f The network input idle screen is displayed. The QR code, login password (a four-digit number that is
automatically generated), PROJECTOR NAME, SSID, IP ADDRESS (WIRELESS) and IP ADDRESS
120 - ENGLISH
Chapter 5 Operation of Function - Network connection
[OFF]
192.168.10.100
255.255.255.0
192.168.10.1
(Blank)
192.168.10.101
255.255.255.0
192.168.10.1
IEEE802.11b/g/n
(Model No.: AJ-WM50)
Wireless module of optional accessories
(Model No.: AJ-WM50)