Making Adjustments And Selections - Panasonic SOLID SHINE PT-VMZ51 Operating Instructions Manual

Hide thumbs Also See for SOLID SHINE PT-VMZ51:
Table of Contents

Advertisement

Making adjustments and selections

It is recommended that images are projected continuously for at least 30 minutes before the focus is adjusted.
6)
1)8)
4)
4)
1)
Roughly adjust the focus of the image with the focus lever. (x page 55)
2)
Change the settings of the [PROJECTOR SETUP] menu → [PROJECTION METHOD] depending on the
installation mode. (x page 35)
f Refer to "Navigating through the menu" (x page 65) for the operation of the menu screen.
3)
Press the input selection buttons on the remote control or the <INPUT SELECT> button on the control
panel to select the input signal.
f The buttons that can be used on the remote control are as follows.
<HDMI 1> button, <HDMI 2> button, <DIGITAL LINK>
USB> button
*1 Not available for the remote control supplied with PT-VMZ51S and PT-VMZ41.
4)
Adjust the front, back and sideway tilt of the projector with the adjustable feet. (x page 55)
5)
Adjust the horizontal / vertical projection position with the horizontal / vertical lens shift dial.
(x page 55)
6)
Adjust the size of the image to match the screen with the zoom lever. (x page 55)
7)
If the input signal is an analog RGB signal, press the <AUTO SETUP> button.
8)
Adjust the focus again with the focus lever.
Note
f When the projector is switched on for the first time after purchase, the [INITIAL SETTING] screen and the [ADMINISTRATOR ACCOUNT] screen
are displayed in order after the projection starts. When the [PROJECTOR SETUP] menu → [INITIALIZE ALL] is executed, the [INITIAL SETTING]
screen is displayed after the projection starts. When the [NETWORK] menu → [INITIALIZE] is executed, the [ADMINISTRATOR ACCOUNT]
screen is displayed after the projection starts next time. For details, refer to "When the initial setting screen is displayed" (x page 47) and
"When the administrator account setting screen is displayed" (x page 49).
Chapter 3 Basic Operations - Switching on/off the projector
4)
5)
5)
button, <COMPUTER 1/2> button, <NETWORK/
*1
7)
3)
2)
2)
3)
7)
ENGLISH - 51

Advertisement

Table of Contents
loading

Table of Contents