Panasonic SOLID SHINE PT-VMZ51 Operating Instructions Manual page 135

[Authentication set up] page
Set the authentication items when POP authentication or SMTP authentication is necessary to send an E-mail.
Click [Detailed set up] → [Authentication set up].
1 [Auth]
Selects the authentication method specified by your Internet
service provider.
2 [SMTP Auth]
Set when the SMTP authentication is selected.
3 [POP server name]
Enter the POP server name.
Allowed characters:
Alphanumerics (A - Z, a - z, 0 - 9)
Minus sign (-) and period (.)
4 [User name]
Enter the user name for the POP server or the SMTP server.
Contents of E-mail sent
Example of E-mail sent when E-mail is set
The following E-mail is sent when the E-mail settings have been established.
=== Panasonic projector report(CONFIGURE) ===
Projector Type
Serial No
----- E-mail setup data -----
TEMPERATURE WARNING SETUP
MINIMUM TIME
INTAKE AIR TEMPERATURE
ERROR
INTAKE AIR TEMPERATURE
----- Error information -----
Error Code
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Intake air temperature
Exhaust air temperature
Light temperature1
PROJECTOR RUNTIME
LIGHT RUNTIME
-------- Current status ---------
MAIN VERSION
SUB VERSION
LIGHT STATUS
INPUT
----- Wired Network configuration -----
DHCP Client
IP address
MAC address
----- Memo -----
Chapter 5 Operation of Function - Web control function
: PT-VMZ71
: 000000000
at [ 30] minutes interval
Over [ 32 degC / 89 degF ]
[ OFF ]
[ OFF ]
: 27 degC /
: 30 degC /
: 64 degC / 147 degF
21 H
21 H
0.25
0.90
LIGHT=ON
NETWORK
ON
192.168.0.105
00:38:37:80:33:44
5 [Password]
Enter the password for the POP server or the SMTP server.
6 [SMTP server port]
Enter the port number of the SMTP server.
(Normally 25)
7 [POP server port]
Enter the port number of the POP server.
(Normally 110)
8 [Submit]
Updates the settings.
80 degF
86 degF
1
2
3
4
5
6
7
8
ENGLISH - 135