Technical Information; Using The Pjlink Function - Panasonic SOLID SHINE PT-VMZ51 Operating Instructions Manual

Technical information

Using the PJLink function

The network function of this projector supports the PJLink class 1 and class 2, and setting of the projector or
querying of the projector status can be performed from the computer using the PJLink protocol.
Note
f Setting the password of the administrator account (x page 106) is required for using the PJLink function of the projector.
PJLink commands
The following table lists the PJLink commands supported by the projector.
f x characters in tables are non-specific characters.
Class Command
1 POWR Power supply control
Power supply status
1 POWR?
query
INPT Input selection
1, 2
INPT? Input selection query
Shutter control/audio
AVMT
output control
1
Shutter status query/
AVMT? audio output status
query
1 ERST? Error status query
Light source status
1 LAMP?
query
1, 2 INST? Input selection list query
1 NAME? Projector name query
Manufacturer name
1 INF1?
query
Chapter 7 Appendix - Technical information
Parameter/
Control details response
string
0
1
0
1
2
11
12
31
32
33
41
51
20
21
30
31
21
30
31
xxxxxx
AAAAA X
11 12 31 32 33 41
51
xxxxx
Panasonic
Remark
Standby
Power on
Standby
Power on
Preparing for switching off the projector
COMPUTER1
COMPUTER2
HDMI1
HDMI2
DIGITAL LINK
*1
MEMORY VIEWER
NETWORK
Mute function disabled
Mute function enabled (muted)
Shutter function disabled (shutter: open), mute function disabled
Shutter function enabled (shutter: closed), mute function enabled
(muted)
Shutter function disabled (shutter: open), mute function enabled
(muted)
Shutter function disabled (shutter: open), mute function disabled
Shutter function enabled (shutter: closed), mute function enabled
(muted)
Indicates fan errors, and returns
1st byte
0 or 2.
Indicates light source errors, and
2nd byte
returns 0 - 2.
Indicates temperature errors, and
3rd byte
returns 0 - 2.
4th byte Returns 0.
Indicates filter errors, and returns
5th byte
0 – 2
Indicates other errors, and
6th byte
returns 0 - 2.
AAAAA: Light source runtime
X: 0 = Light source off, 1 = Light source on
―
Returns the name set tin the [NETWORK] menu → [PROJECTOR
NAME].
Returns manufacturer name.
f 0 = No error is
detected
f 1 = Warning
f 2 = Error
ENGLISH - 153